Wheel lawn mower parameters
Model : HT750 |
Whole machine size | 930*860*580mm |
Packing size | 1060*960*810mm |
Whole machine weight | 130kg |
Cutting width | 550mm |
Adjustable height | 10-150mm |
Cutting height | 20-150mm |
Walking speed | 0-6km/h |
Working slope | 0-35° |
Minimum distance from the ground | 20mm |
Operation method | Remote control walking, remote control knife disc lifting |
Walking Way | Wheel walking |
starting mode | Hand pull/electric start |
control voltage | 12v |
Engine Brand | LONCIN(Optional brands Yamaha, Dajiang) |
Engine Power | 7.5hp |
Engine Type | Vertical axis four stroke |
Features of wheel mower
1. Fast cutting speed, choose Yamaha or Loncin four-stroke engine, 1 hour can cut grass 1300-2000 square meters, farm weeding efficiency.
2. fast rotary cutting height of 20~150mm weeds, remote control operation, the machine rotates 360 degrees, fast rotary cutting, save time and labor.
3. effective control distance 200 meters, remote control device signal is strong, control distance up to 200 meters.
4. The height of the chassis can be lifted flexibly, lifting range 10-150mm.
5. HT750 adopts the Italian rotary cutting technology and the European and American working environment combined with the design principle, intelligent weeding, simple and convenient.
HT750 wheel mower operating instructions:
1.Check the fuel condition. It is recommended to use clean, fresh, unleaded
gasoline with an octane number greater than or equal to 92. The fuel tank
volume is generally 1L.
2. Check machine oil situation, the engine does not add oil during transport,
and there must be sufficient oil before starting the engine. Recommended oil
models SAE10W-30.
a) Turn off the engine and put it horizontally on the ground.
b) Remove the oil dipstick from the oil filler and wipe it clean
c) Insert the machine oil, when the oil quality neck is just in contact with the oil
supply tube, check the oil level.
d) If the oil level is too low, add the recommended engine oil to the upper limit
of the oil level, don't add too much
e) Replace the machine oil and tighten, as shown picture 1
