Availability: | |
---|---|
Quantity: | |
HT550
Fast weeding, 2000㎡/h
Efficiently and safely maintain steep slopes and difficult terrain
Fast rotary cutting of weeds with a height of 20~150mm
Stop wasting time and manpower to manually trim sloped areas
The effective control distance is 200m
Avoid putting staff in unsafe situations to mow sloped or hazardous ground
The height of the chassis can be raised and lowered at will.
20~100mm Flexible switching of lfting height
Remote Control
simplicity of operator
Engine
Euro 5 emission 196CC standard on the machine,
Optional: Japan YAMAHA 7HP/USA KOHLER
7.5HP/China LONCIN 9HP
Remote control OPERATION:
D/R switch(large and small rudder):adjust the walking speed of the machine (the factory default is high gear).The left joystick controls the machine to move forward and backward, and the right joystick controls left and right turns.
Channels(two-stage switch):the cutter head is raised and lowered to adjust the cutting height of the cutter head.
Rudder fine-tuning(left-right adjustment):When adjusting the walking speed of the machine, the ESC inside the machine will make a “drip” sound. At this time, you can use the “rudder fine-tuning” button until the ESC inside the machine does not make any sound.
Throttle fine adjustment (up and down adjustment):The same principle as the rudder fine adjustment button .
Power switch:push up to turn on the remote control, and pull down to turn off the remote control.
Model | HT550 |
Cutting width | 550mm |
System voltage | 48v |
Adjustable height | 20-100mm |
Cutting height | 20-150mm |
Walking speed | 0-3.6km/h |
Working slope | 0-35° |
Minimum distance from the ground | 20mm |
Engine | gasline 7.5hp 196cc |
Battery | 4 pieces poweful charging |
Net weight | 105kg |
Gross weight | 130kg |
Packing size | 1100*890*440mm |
content is empty!